86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


http://www.bit-ok.com/en/

Products >> Screw Terminal Aluminum Electrolytic Capacitors

Screw Terminal Aluminum Electrolytic Capacitors

Build Your Online Product Catalogs?



Description
Product Name: Screw Terminal Aluminum Electrolytic Capacitors
Supply Ability: 50000000pcs
Related proudcts electrolytic, aluminum electrolyt,
Specifications 400v 5600uf
Price Term: fob
Port of loading: shanghai
Minimum Order 100
Unit Price: 35US$

usage £ºsupply,inverter,medium frequency furance,DCwelder,inverter welding machine Standard products,85℃ 3000hours Temperature range:-25~+85
Voltage range:400~500v
Capacitance range:100~22000uf @20℃,120Hz Capacitance tolerance:¡À20% Leakage current:¡Ü0.01CV or 1.5mA,whichever is the smaller,5 minutes test@20℃ Maxinum DF:0.18 @20℃,120Hz Temperature characteristics:C(-25℃)/C(+20℃)¡Ý0.7 200~450 C(-25℃)/C(+20℃)¡Ý0.7 500 Insulating resistance:The value measured by applying DC 500V insulation resistance tester between all terminals and snap ring with insulating sleeve¡Ý100M¦¸ Insulating Voltage:Apply AC 2000V between all terminals and snap ring with insulating sleeve for 1 minute and no abnormality appears. Durability:Apply rated ripple current on capacitor with voltage not more than rated voltage under85℃ environment and apply rated voltage for 3000hours,then recover to 20℃ environment and the test results should satisfy the requirements as below. Capacitance change rate (¡÷c£©¡Üinitial value¡À20% DF(tg¦Ä£©¡Ü200%of initial specification value Leakage current¡Üinitial specification value High-temperature zero load characteristics:Capacitor kept in 85℃ environment for 1000hours,then tested in 20℃ environment and the test result should satisfy the requirements as below. Capacitor change rate (¡÷C£©¡Üinitial value¡À15% DF£¨tg¦Ä£©¡Ü150%of initial specification value Leakage current¡Üinitial specification value (Voltage pretreatment should be done before test:apply rated voltage on both ends of capacitor through a resister of about 1000¦¸ for 1Hrs,then discharge electricity through 1¦¸/V resister after pretreatment.Please capasitor under normal temperature for 24hrs after total discharging,then starts test.)

Contact Us
Company: http://www.bit-ok.com/en/
Contact: Mr. Fang Jack
Address: No.258,Guangcun Road, Yangwang Industrial Park, Nanqiao,Fengxian District,Shanghai,China.
Postcode: 200000
Tel: 86-21-33612111
Fax: 86-21-33617275
E-mail:         


Copyright© http://www.bit-ok.com/en/ All Rights Reserved.
Tel : 86-21-33612111 Fax : 86-21-33617275
Powered by 86exporter.com